Sandbox Reserved 1069

spinqualitylabelsall models Zinc Transporter YiiP Show:Asymmetric Unit Biological Assembly Drag the structure with the mouse to rotate   Export Animated Image

Contents 1 Structure 1.1 Interlocking Salt Bridge 1.2 Zn2+ Binding Sites 2 Mechanism of Transport 2.1 Zn2+ Induced Conformation Change 3 Electrostatic Interactions 4 References

Structure

YiiP is a homodimer (protein dimer), with each monomer consisting of 238 residues with a TransMembrane () and C-Terminal () domain that are connected via a charge interlocking mechanism located on a flexible loop. There are three Zn²⁺ binding sites present. Site A is located in both TMDs of the protein, site C is located in the CTD, and site B is located at the junction of the two domains. The TMD, where Zn²⁺ binding site A resides, consists of 6 transmembrane (TM) , 4 of which (TM1, TM2, TM4, TM5) pivot about the ion binding site A. The remaining two helices, TM3 and TM6, are oriented to the bundle. Movement of these helices play a role in the function of Zn²⁺ transport.

A large portion of the protein containing binding site C, the CTD, approximately 30 Å in length^[1], protrudes into the cytoplasm functioning as a Zn²⁺ sensor within the cell. Zn²⁺ binding at site C helps hold the CTD together and is thought to stabilize conformational changes in YiiP. YiiP has two different functional conformations which dictates whether or not YiiP is open to the periplasm or the cytoplasm. An interlocked salt bridge connects the two domains with the Lys77 and the Asp207 from each monomer. This salt bridge acts as the hinge for Yiip's conformational changes.

Interlocking Salt Bridge

The formation between Lys77 and Asp207 of each domain of YiiP forms an interlocking interaction that acts as the pivot point of the conformational change that drives the function of YiiP. Interlocking interactions are disrupted when Zn²⁺ is bound, due to movement of the antiparallel helices, causing a conformational shift in YiiP. This salt bridge also aids in holding the two monomers together, where residues around the salt bridge further stabilize the two domains in the v-shaped void where the domains connect. This prevents degradation of the protein's interlock via interactions with the environment.

Zn²⁺ Binding Sites

Each Yiip monomer contains three Zn²⁺ binding sites. There is an active site (Site A), and two cytoplasmic binding sites (Site B and C). It was found that only site A and C are conserved, while the function of Site B is not well defined, though it is believed that it plays a role in subunit dimerization.

Binding Site A

is in the center of the transmembrane domain, attached and confined via residues from the TM2 and TM5 helices. The TM2 domain has and , and the TM5 has and , which facilitate the binding and releasing of Zn²⁺ within the sites. The TM5 helix is significantly shorter than the other 5 helices around it, and this length forms a cavity in the membrane. In turn, this cavity is able to bind a Zn²⁺ ion. This site is the protein's active site, meaning that this is where the Zn²⁺ is able to attach and eventually exit the cell via proton transport. This particular site has an ideal tetrahedron among its residues which is preferred for Zn²⁺, thus making it the perfect active site for Zn²⁺ to bind.

It is important to note that the structure of this binding site is rigid because of the coordination of the Zn²⁺ between the four residues. This rigidity is indicative that any slight shift on either of the helices will cause a drastic readjustment of the coordination of Zn²⁺. In addition, there are no outer-shell constraints to hold the residues in place, which means that with a readjustment of the molecule, there is no energy being expended to bind or release another Zn²⁺ molecule. Therefore, the Zn²⁺ is able to rapidly release and a new Zn²⁺ can bind again with a simple reorientation or shift of the molecule. This rapid on off bind and release mechanism is the regulator of homeostatic levels of Zn²⁺ in the cell. This regulation is significantly faster than other Zn²⁺ exchange rate proteins- by several orders of magnitude.

Binding Site C

has vastly opposite properties from what is seen in binding site A. It is located on the TM2-TM3 loop on the cytoplasmic membrane and between the two C-terminus domain interfaces. Here, there is a binuclear coordination of Zn²⁺ between the residue that bridges the Zn²⁺ ions together and the four coordinating residues (, His248, His283 and His261). The Asp285 residue is conserved, meaning it does not have outer shell constraints. However, the four histidine residues all have outer shell constraints. These constraints consist of hydrogen bonds to the residues surrounding the binding site. These hydrogen bonds can form bidentate bonds, which means that the hydrogen bond attaches to a metal in two places. These bonds in turn create an extensive network of interactions at the CTD interface, and it is these interactions that allow for stability and strengthening of the CTD-CTD association.

Mechanism of Transport

YiiP's ability to export Zn²⁺ from the cytoplasm is best described as an alternating access mechanism with Zn²⁺/H⁺ antiport. YiiP has 2 major structural conformations as shown by the crystallized structures 3H90 and 3J1Z ^[1] (a YiiP homolog derived from Shewanella oneidensis). 3H90 shows YiiP in its outward-facing conformation and 3J1Z shows the YiiP homolog in an inward-facing conformation. When YiiP is saturated with Zn²⁺ it favors the whereas when active sites are either empty or bound to H⁺ the is favored. This drives the export of Zn²⁺ from the cytoplasm and enhances the coupling of the proton-motive force. Although YiiP exists as a homodimer both monomers can undergo conformation change independent of one other to produce the alternating access mechanism.

Zn²⁺ Induced Conformation Change

Conformation changes occur in the TMD and CTD, both of which are heavily influenced by the presence of Zn²⁺.

The conformation change directly involved with Zn²⁺/H⁺ antiport occurs in the TMD as helix pivoting controls what environment site A is available to. Conformation change occurs when the transmembrane helix pairs TM1, TM2, TM4, and TM5 pivot around cation binding site A.^[2]

It is believed that the energy for TMD conformation change comes from energy of binding each substrate. Changing to the outward from the inward-facing conformation causes a shift in which disrupts the tetrahedral geometry of active site A. This in turn decreases binding affinity site A has for Zn²⁺ making export to the periplasm possible. After Zn²⁺ is exported and site A is either empty or bound to H⁺ change back to the inward-facing conformation is favored.

In contrast the main purpose of conformation change in the CTD is to stabilize the YiiP dimer and to act as a Zn²⁺ sensor. This is possible because of the flexible loop that links the TMD and the CTD. This loop harbors the charge interlock which serves as a hinge that allows movement of the CTD. Using FRET to measure the distance between the CTD of each monomer fluorescence quenching was observed as the concentration Zn²⁺ increased, which supports that idea that Zn²⁺ induces a stabilizing conformation change in the CTD.^[3]

Electrostatic Interactions

along the exterior surface of the protein is primarily neutral for the TMDs, but transitions to positive near the location of the charge interlock and interior side of the cell membrane. This positive section is characteristic of trans-membrane proteins as a means of achieving proper orientation within the cell membrane. Binding sites A, B, and C, as well as the CTDs of both monomers, all possess a high negative charge relative to the other charges present, facilitating the binding and releasing of Zn²⁺ ions. The two CTDs are held together by the charge interlock and hydrophobic interactions of the TMDs, despite their electrostatic repulsion. Upon the release of Zn²⁺ ions, the CTDs undergo alterations to electronegativity, which enables domain separation.

References

^[4]

^[5]

^[6]

^[7]

1. ↑ Coudray N, Valvo S, Hu M, Lasala R, Kim C, Vink M, Zhou M, Provasi D, Filizola M, Tao J, Fang J, Penczek PA, Ubarretxena-Belandia I, Stokes DL. Inward-facing conformation of the zinc transporter YiiP revealed by cryoelectron microscopy. Proc Natl Acad Sci U S A. 2013 Jan 22. PMID:23341604 doi:http://dx.doi.org/10.1073/pnas.1215455110
2. ↑ Coudray N, Valvo S, Hu M, Lasala R, Kim C, Vink M, Zhou M, Provasi D, Filizola M, Tao J, Fang J, Penczek PA, Ubarretxena-Belandia I, Stokes DL. Inward-facing conformation of the zinc transporter YiiP revealed by cryoelectron microscopy. Proc Natl Acad Sci U S A. 2013 Jan 22. PMID:23341604 doi:http://dx.doi.org/10.1073/pnas.1215455110
3. ↑ Lu M, Chai J, Fu D. Structural basis for autoregulation of the zinc transporter YiiP. Nat Struct Mol Biol. 2009 Oct;16(10):1063-7. Epub 2009 Sep 13. PMID:19749753 doi:10.1038/nsmb.1662
4. ↑ Fu, Min Lu Dax, and Science21 Sep 2007 : 1746-1748. "Structure of the Zinc Transporter YiiP." Structure of the Zinc Transporter YiiP | Science. Science Magazine, n.d. Web. 24 Feb. 2017.
5. ↑ "Protein Page: YiiP." Protein Page: YiiP. National Center for Biotechnology Information, n.d. Web. 24 Feb. 2017.
6. ↑ "Laboratory of David Stokes." NYUSOM. NYU School of Medicine, n.d. Web. 24 Feb. 2017.
7. ↑ Plum, Laura M., Lothar Rink, and Hajo Haase. "The Essential Toxin: Impact of Zinc on Human Health." International Journal of Environmental Research and Public Health. Molecular Diversity Preservation International (MDPI), Apr. 2010. Web. 24 Feb. 2017.