This old version of Proteopedia is provided for student assignments while the new version is undergoing repairs. Content and edits done in this old version of Proteopedia after March 1, 2026 will eventually be lost when it is retired in about June of 2026.
Apply for new accounts at the new Proteopedia. Your logins will work in both the old and new versions.
Tachyplesin
From Proteopedia
| Line 18: | Line 18: | ||
[[Image:derivatives.jpg]] | [[Image:derivatives.jpg]] | ||
| - | |||
Of those 3 linear derivatives of TP-I, NMR structural investigation had shown that TPA4 was unstructured in solution. Also, TPA4 was inactive in terms of antimicrobial activity which might be due to its incapability to form hairpin loop structure. Therefore, the hairpin properties of the peptide seems to be important for recognition of lipopolysaccharides and its biological activities. | Of those 3 linear derivatives of TP-I, NMR structural investigation had shown that TPA4 was unstructured in solution. Also, TPA4 was inactive in terms of antimicrobial activity which might be due to its incapability to form hairpin loop structure. Therefore, the hairpin properties of the peptide seems to be important for recognition of lipopolysaccharides and its biological activities. | ||
Revision as of 19:08, 22 January 2015
IntroductionTachyplesin I (TP-I) is an antimicrobial polypeptide originally detected in the leukocytes of Japanese Horse Shoe Crab. It has also been reported to inhibit the growth of bacteria, fungui and viruses. The antimicrobial activity of the polypeptide is contributed by electrostatic interaction between the negatively charged membrane of bacteria and fungi to positively charged part of [1] (see the Hydrophobic and Polar amino acids). Specifically, TP-I shows high affinity for negatively charged lipopolysaccharides (LPS) of gram-negative bacteria, thus neutralizing its effects. Structural highlightsTachyplesin I is a 17-residue peptide containing six cationic residues with molecular weight 2,269 and isoelectric point (pI) of 9.93.[2] The amino acid sequence of the TP-I is NH₂-Lys-Trp-Cys-Phe-Arg-Val-Cys-Tyr-Arg-Gly-Ile-Cys-Tyr-Arg-Arg-Cys-Arg-CONH₂. 
The sequence adapts an antiparallel β-sheet (hairpin) conformation in solution, with a for the centrally located residues , stabilized by two cross-strand between Cys³-Cys¹⁶ and Cys⁷-Cys¹²[3][4], and C-terminus amidation. In addition there are H-bonds and aromatic rings stacking interactions which helps stabilize the hairpin loop structure of the peptide. Among all the existing interactions, cysteine bridge being considered as the principal contributor of the structure, three linear derivatives of TP-I (, TPF4 and TPA4) were created, in which the bridging cysteine residues are uniformly replaced with tyrosine, phenylalanine, and alanine, respectively[1][5]. The linear derivatives of TP-I are mentioned below: Of those 3 linear derivatives of TP-I, NMR structural investigation had shown that TPA4 was unstructured in solution. Also, TPA4 was inactive in terms of antimicrobial activity which might be due to its incapability to form hairpin loop structure. Therefore, the hairpin properties of the peptide seems to be important for recognition of lipopolysaccharides and its biological activities. TP-I undergoes a conformational change in the . The backbone of the polypeptide becomes , making it more stable. A Cys Deleted Linear Analog(CDT) is a linear mutant lacking the cysteines and therefore lacking the disulfide bonds (NH₂-Lys-Trp-Phe-Arg-Val-Tyr-Arg-Gly-Ile-Tyr-Arg-Arg-Arg-CONH₂). It contains a broad spectrum of bactericidal activity with a reduced hemolytic property that stems from selective interactions with the negatively charged lipids including LPS. CDT has been demonstrated to markedly inhibit the growth of Gram negative and Gram positive bacterial strains akin to TP-I. But, minimum inhibitory concentration (MIC) values for CDT were found to be lower against Escherichia coli and Listeria monocytogenes in comparison to the wild type TP-I peptide. CDT Structure CDT, like TP-I, has a β-turn in the in its LPS-bound structure. The β-hairpin topology of CDT is sustained by the between the aromatic ring of Trp2 and the side-chain of nonpolar amino acid of Val5 and the cationic side-chain of residue Arg11. There is a close proximity between residues , supported by the nuclear overhauser effects (NOEs) involving indole ring protons of Trp2 with side-chain proton of Ile9. These packing interactions have rendered an approximate anti-parallel orientation of the hairpin structure of CDT in presence of LPS. The β-hairpin like structure of CDT displays an extended positively charged surface patch of . These positively charged basic residues interacts with the anionic phosphate groups of LPS with the help of salt bridges and/or hydrogen bonds. The interactions between CDT and LPS may lead to a plausible disruption or fluidization of LPS structures facilitating traversal of the peptide through the LPS-outer membrane.[3] Mode of actionTP-I has affinity to LPS and also has ability to permeabilize the cell membrane of pathogens. TP-I primary and critical target is the cell membrane.[6]Docking model suggests strong affinity between TP-I and LPS; gained by interaction between cationic residues of TP-I with phosphate group and saccharides of LPS. Furthermore, interaction between hydrophobic residues of TP-I with acyl chains of LPS strengthens the TP-I/LPS interaction. The binding of TP-I/LPS neutralizes LPS, which is widely considered as endotoxin, and disrupts membrane function. In addition to LPS binding, footpriting analysis has revealed the binding of TP-I to DNA by interacting specifically in minor groove of DNA duplex. The interaction between TP-I and DNA is contributed by secondary structure of the peptide which contains an antiparallel beta-sheet constrained by two disulfide bridges and connected by β-turn [7]. By binding to DNA and RNA TP-I inhibits the synthesis of macromolecules. In summary, three processes might happen upon TP-I exposure: (1) Bacterial cell membranes are penetrated without disruption of the membrane and the peptide reaches the inner structures of the cell, damaging critical intracellular targets and interfering with intracellular functions and normal metabolism. (2) Pores are formed in the cell wall, causing leakage of intracellular content, leading to cell death. (3) DNA, RNA or protein synthesis are inhibited, killing the bacteria.[6] Importance and relevanceEvidences suggest that TP-I has ability to permeabilize the cell membranes of pathogens.[1]. Also, LPS and DNA being the potential biological targets of the peptide, its antimicrobial activity might be exploited. Eyeing the potential of TP-I, it has been insetred successfully in genome of Ornithogalum dubium and Ornithogalum thyrsoides. These ornamentals plants were originally sensitive to soft rot erwinias (SREs) and insertion of TP-I in the plants has successfully protected them without affecting their normal physiology [8]. Escherichia coli and Listeria monocytogenes are Gram-negative and Gram-positive bacteria, respectively. They are the most common intestinal tract pathogenic bacteria in animals and humans. Studying the effect of TP-I on E. coli and S. aureus will be valuable in guiding clinical practice. The potential mechanism of E. coli membrane disruption by TP-I is the induction of macromolecule leakage into the cytoplasm and the release of potassium ions, leading to an increase in inner permeability, the formation of a toroidal pore, the neutralization of LPS, and the disruption of the permeability barrier of the outer membrane. TP-I killed E. coli mainly through cell membrane damage and intracellular esterase inactivation dependent on concentration. In food production, requirements must be met for producing high quality food with minimal microbial contamination, and the determination of microbial viability based on different physiological and metabolic parameters is critical for acceptable sterilization. Therefore, the presence of injured, metabolically active bacteria is a very important aspect to consider in food production and for clinical applications. Sub lethally injured cells might be repaired under suitable conditions. If TP-I is applied as a clinical treatment at a lower concentration than the MIC over a long period of time, drug resistance could develop.[6] Possible Function as anti-tumor peptideThe cationic nature of Tachyplesin allows it to interact with anionic phospholipids present in the bacterial membrane and thereby disrupting membrane function. Besides this, the structural nature of Tachyplesin also highlights its antitumor properties. Since it can interact with the membrance of prokaryotic cell, it is likely that TP-I can also interact with the mitochondrial membrane of eukaryotic cells. Mitochondria are widely believed to have evolved from prokaryotic cells, that have established a symbiotic relationship with the primitive eukaryotic cell which signifies the structural similarity of mitochondrial and prokaryotic membranes. It was found that the synthetic Tachyplesin conjugated to the integrin homing domain (RGD-Tachyplesin) can inhibit the proliferation of TSU tumor cells prostate cancer and B16 melanoma cells as well as endothelial cells in a dose-dependent manner in vitro and reduce tumor growth in vivo by inducing apoptosis.[2]. Besides this RGD-Tachyplesin can activate caspases and induce Fas ligand, which are the markers for programmed cell death (PCD). Collectively, suppression of tumor associated cell and induction of programmed cell death will eventually act as therapy for cancer and tumor cells.
See AlsoReferences
Quiz
| ||||||||||||
Proteopedia Page Contributors and Editors (what is this?)
Shulamit Idzikowski, Janak Raj Joshi, Michal Harel, Alexander Berchansky, Joel L. Sussman, Angel Herraez, Jaime Prilusky
