Sandbox Reserved 1069

spinqualitylabelsall models Zinc Transporter YiiP Show:Asymmetric Unit Biological Assembly Drag the structure with the mouse to rotate   Export Animated Image

Contents 1 Structure 1.1 Interlocking Salt Bridge 1.2 Zinc Binding Sites 2 Zn2+ Induced Conformation Change 3 Mechanism of Transport 4 Electrostatic Interactions 5 References

Structure

YiiP is a homodimer, with each monomer consisting of 238 residues (protein dimer) with a transmembrane (TMD) and C-terminal (CTD) domain that are connected via a charge interlocking mechanism located on a flexible loop. There are 3 Zn²⁺ binding sites per unit of homodimer. Site A is located in the TMD, site C is located in the CTD, and site B is located at the junction of the domains join. Both TMD are composed of 6 helices, 4 of which (TM1,TM2,TM4,TM5) form a pore in which Zn²⁺ and H⁺ can reach binding Site A. Zn²⁺ binding at site C helps hold the CTD together and is thought to stabilize conformational changes in YiiP.

Each monomer structure is classified into two different domains, the Trans-Membrane Domain (TMD) and C-Terminus Domain (CTD). The TMD consists of six helices, forming binding site A, four of which are oriented in a parallel manner, with respect to each other, while the remaining two are aligned anti parallel to this four helix cluster. A "" or "charge interlock" consisting of four amino acid residues, two Lysines (Lys 77) and two Aspartates (Asp 207), forms a junction that both monomers of Yiip converge at, forming a pivot point for conformation changes. A large portion of the protein containing binding site C, approximately 30 Å in length^[1], protrudes into the cytoplasm functioning as a zinc sensor within the cell.

YiiP has a "Y" shape with two different functional conformations. A total of six helices comprise the transmembrane portion of each . Four of these helices are bundled together while the remaining two are oriented antiparallel to the . Movement of these helices play a role in the function of YiiP. An interlocked salt bridge connects the two domains with the Lys77 and the Asp207 from each protomer - visualized .This salt bridge acts as the hinge for the conformational changes that YiiP undergoes. YiiP has three zinc binding sites, two of which are known to play an active role in the function of YiiP. Site A (link) sits in extracellular space outside of the cell, while site C is situated inside of the cell to act as a sensor of intracellular zinc concentrations.

Interlocking Salt Bridge

The salt bridge formation between Lys77 and Asp207 of each domain of YiiP form an interlocking salt bridge that acts as the pivot point of the conformational change that drives the function of YiiP. The salt bridge is disrupted when Zinc is bound, due to movement of the antiparallel helices. This disrupts the ion-ion attractions that established the salt bridge- causing a conformational shift in YiiP. This salt bridge also aids in holding the two protomers together. residues beneath the salt bridge further stabilize the two domains in the v-shaped void where the domains connect. This prevents degradation of the protein's binding sites via interactions with the environment.

Zinc Binding Sites

Each zinc promoter contains three zinc binding sites. There is an active site (Site A), and two cytoplasmic binding sites (Site B and C). It was found that only site A and C are conserved, while the function of Site B is still unknown, though it seems to play a role in subunit dimerization.

Binding Site A

Binding site A is in the center of the transmembrane domain, attached and confined via residues from the TM2 and TM5 helices. The TM2 domain has and Asp49, and the TM5 has His153 and Asp157. The TM5 helix is significantly shorter than the other 5 helices around it, and this length forms a cavity in the membrane. In turn, this cavity is able to bind a zinc ion. This site is the protein's active site, meaning that this is where the zinc is able to attach and eventually exit the cell via proton transport. This particular site has an ideal tetrahedron among its residues which is preferred for zinc, thus making it the perfect active site for zinc to bind.

It is important to note that the structure of this binding site is rigid because of the coordination of the zinc between the four residues. This rigidity is indicative that any slight shift on either of the helices will cause a drastic readjustment of the coordination of zinc. In addition, there are no outer-shell constraints to hold the residues in place, which means that with a readjustment of the molecule, there is no energy being expended to bind or release another zinc molecule. Therefore, the zinc is able to rapidly release and a new zinc can bind again with a simple reorientation or shift of the molecule. This rapid on off bind and release mechanism is the regulator of homeostatic levels of zinc in the cell. This regulation is so rapid in fact, it is significantly faster than other zinc exchange rate proteins- by several orders of magnitude.

Binding Site C

has vastly opposite properties from what is seen in binding site A. It is located on the TM2-TM3 loop on the cytoplasmic membrane and between the two C-terminus domain interfaces. Here, there is a binuclear coordination of zinc between the residue that bridges the zinc ions together and the four coordinating residues (His232, His248, His283 and His261). The Asp285 residue is conserved, meaning it does not have outer shell constraints. However, the four histidine residues all have outer shell constraints. These constraints consist of hydrogen bonds to the residues surrounding the binding site. These hydrogen bonds can form bidentate bonds, which means that the hydrogen bond attaches to a metal in two places. These bonds in turn create an extensive network of interactions at the CTD interface, and it is these interactions that allow for stability and strengthening of the CTD-CTD association.

Zn²⁺ Induced Conformation Change

Conformation changes occur in the TMD and CTD, both of which are heavily influenced by the presence of Zn²⁺. The conformation change directly involved with Zn²⁺/H⁺ antiport occurs in the TMD as helix pivoting controls what environment site A is available to. Conformation change occurs when the transmembrane helix pairs TM3-TM6 pivot around cation binding site. It is believed that the energy for TMD conformation change comes from energy of binding each substrate. Changing to the outward from the inward-facing conformation causes a shift in TM5 which disrupts the tetrahedral geometry of active site A. This in turn decreases binding affinity site A has for Zn²⁺ and causes Zn²⁺ to leave site A which then favors change back to inward-facing conformation. In contrast the main purpose of conformation change in the CTD is to stabilize the YiiP dimer and acts as a Zn²⁺ sensor. This is possible because of the flexible loop that links the TMD and the CTD. This loop harbors the charge interlock which serves as a hinge that allows movement of the CTD. Using FRET to measure the distance between the CTD of each monomer fluorescence quenching was observed as the concentration Zn²⁺ increased, which supports that idea that Zn²⁺ induces a stabilizing conformation change in the CTD.

Mechanism of Transport

YiiP's ability to export Zn²⁺ from the cytoplasm is best described as an alternating access mechanism with Zn²⁺/H⁺ antiport. YiiP has 2 major structural conformations as shown by the crystallized structures 3H90 and 3J1Z (a YiiP homolog derived from Shewanella oneidensis). 3H90 shows YiiP in its outward-facing conformation and 3J1Z shows the YiiP homolog in an inward-facing conformation. When YiiP is saturated with Zn²⁺ it seems to favor the perplasmic/outward-facing conformation whereas when active sites are either empty or bound to H⁺ the inward facing conformation is favored. This drives the export of Zn²⁺ from the cytoplasm and enhances the coupling of the proton-motive force. Although YiiP exists as a homodimer both monomers can undergo conformation change independent of one other to produce the alternating access mechanism.

Electrostatic Interactions

along the exterior surface of the protein is primarily neutral for the TMDs, but transitions to positive near the location of the charge interlock and interior side of the cell membrane. This positive section is characteristic of trans-membrane proteins as a means of achieving proper orientation within the cell membrane. Binding sites A, B, and C, as well as the CTDs of both monomers, all possess a high negative charge relative to the other charges present, facilitating the binding and releasing of Zn²⁺ ions. The two CTDs are held together by the charge interlock and hydrophobic interactions of the TMDs despite their electrostatic repulsion. Upon the release of Zn²⁺ ions, the CTDs undergo electronegativity alterations, which enables domain separation.

References